EP 424 FEATURES
- AutoFeed mechanism automatically feeds in radial and axial planes
- AutoFeed lets you dial-in your weld prep profile without stopping
- AutoFeed eliminates bulky profile templates and incline tool slides
- Single point machining from 4 to 24 inches OD (DN100-600)
- Form tool machining from 4 to 16 inches OD (DN100-400)
- Mounts to pipe ID with easy to use self-centering mandrels
- Available without AutoFeed for basic form tooling and facing
Models: Form Tool Basic with standard mandrel (AutoFeed optional) AutoFeed Deluxe model with standard mandrel and AutoFeed
AutoFeed Premium model with standard, elbow & independent mandrels & AutoFeed
System Function: ID mount end prep machine tool with available AutoFeed to bevel, compound bevel, counterbore, J Prep, and flange facing on pipe, fittings and valves. Also available as Form Tool Basic without AutoFeed for form tooling and flange facing
System Capacity: Preps large diameter pipe 4 – 24 inches OD (DN100-600), form tools 4 – 16 inches OD (DN100-400); varies by application and tooling
Drive Options: Hydraulic, pneumatic, 110V and 480V electric drive
Power Requirements:
- Hydraulic 10 GPM @ 1500 PSI (38 LPM @ 103 BAR)
- Pneumatic 95 CFM @ 90 PSI (2.7 Cubic Meters per Minute @ 6.2 BAR)
- Electric 110V 20A Eibenstock or 440V 20A 3 phase Servo Drive
Feed: AutoFeed system with dial control, or fully manual
Feed Stroke/Rate: 3.5” (88.9mm) useable stroke / variable feed rate, user adjustable
Construction: Lightweight aluminum housing, hardened steel main shaft, high capacity bearings and load surfaces, quick deploy mandrel legs, captivated hardware
Finish: Multistage powder coat red enamel finish with black oxide and clear coated components
Tool RPM / Tooling: 0 to 20 rpm / standard Wachs single point beveling and form tooling, high speed steel or carbide
Tool Slots: Rotating tool head with 3 tooling slots for simultaneous bevel, facing and counterboring. Optional single point/facing module with single slot and positive starwheel advance
Packaging: Heavy duty storage case – all models
Weight: Modular construction, each module under 70 lbs (31.75 Kg), total weight with storage case 178 lbs (80.7 Kg)
STANDARD EQUIPMENT
- Standard Mandrel
- Extension Leg Kit
- Heavy Duty Storage Case
- Operating Hand Tools
- Operating Manual
OPTIONAL EQUIPMENT
- Electric Drive Motors
- Independent Mandrel
- Short Perch Mandrel
- AutoFeed Upgrade Kit for Basic Model
- Single Pointing 36” Slide
- Interchangeable Tooling Mounts
- Genuine Wachs Tooling
